| Technical Specification |
| New Mercury |
ME-12 |
ME-25 |
ME-40 |
|
| Laser Source |
12W |
25W |
40W |
|
| Sealed CO2 laser |
| Work Area |
25" x 18" (635mm x 458mm) |
Max. Part Size
(W x L x H) |
31.5 x 22.4 x 6.5 in. ( 800 x 570 x 165 mm)-All doors closed |
| 26.8 x x 6.5 in. ( 680 x x 165 mm)-All doors open |
| Table Size |
31.1 x 20.9 in. (790 x 530 mm) |
Overall Dimension
W x D x H |
44.3" x 28.3" x 39.6"
( 1125 x 720 x 1005 mm) |
| Drive |
Closed-loop DC servo control |
| Maximum Speed* |
42 IPS |
| Throughput * |
166.3 in². / hr (1072.8 cm² / hr) |
| Speed Control |
Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job) |
| Power Control |
Adjustable from 0~100% and 16 colors linked
power setting per job |
| Z Axis Moving |
Automatic |
| Resolution (DPI) |
Available 125, 200, 250, 300, 380, 500, 600, 760, 1000 |
| Computer Interface |
Standard printer port and USB cable port |
| Memory Buffer |
32 MB standard |
| Display Panel |
4-line LCD display showing current file name, total working time, Laser power, Engraving Speed, file loaded into memory buffer, setup and diagnostic menus. |
| Safety |
Class IIIR for red pointer |
| Standard Features |
| Auto Focus |
Yes |
| Red Dot Pointer |
Yes |
| Pass through doors |
Yes |
| 3D and Stamp Mode |
Yes |
| Facility Requirement |
| Electrical |
Below 40 watt, 100~240 Volt AC Auto Switching;
40 Watt and above, 200~240 Volt AC auto switching |
| Power Consumption |
700W |
880W |
2000W |
|
| Air Extraction System |
External exhaust system required, One 4" connection on the back of the machine |
Above specifications are subject to change without prior notice
|
